Some Information About All BlackBerry phones
1. How To Check firmware Version ?
To check the firmware version of your Blackberry simply navigate it? menu:-
Goto SETTINGS or OPTIONS then ABOUT
Images of firmware version
2. How To find imei ?
To find imei is going to Options->Status there you will find imei number of phone
3. How To Connect blackberry With Pc.?
connect your blackberry to pc with data cable (same motorola v3 usb cable)
4. how To update/ReInstall BlackBerry Operating System ?
Connect your device to your computer.
Open the BlackBerry® Desktop Manager.
Click Application Loader.
Click Start in Add/Remove Applications or Update Applications.
If necessary, perform the following actions:
If the Device Security Password dialog box appears, type your device password. Click Next.
If the Communication Port Selection dialog box appears, specify a communications port. Click Next.
Click Next.
Perform any of the following actions:
To add an application that appears in the list, select the check box beside the application.
To add an application that does not appear in the list, click Browse. Double-click an application loader (.alx or .ali) file.
Click Next.
Click Finish.
#Without desktop manager read this
1: Download & instle the blackberry flashfile (no need instle blackberry desktop manager)
2: Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader
3: With battery Connect your BlackBerry device to your computer
4: Run Loader from c:\program files\common files\research in motion\apploader & click Next
5: Select all software you want installed.
6: Proceed to the end portion untill you see the "Finish" button
7: Very IMPORTANT. do not hit the finish button, instead select the ADVANCED button.
8: Make sure both boxes are checked.
9: Proceed until it ask you if you want to automatically back up and restore, Select DO NOT AUTOMATICALLY BACK UP MY HANDHELD do next
10: & wait for Your device's software has been updated successfully
5. from where we get BlackBerry desktop software ?
BlackBerry Desktop Software v4.7
http://rapidshare.com/files/331643973/470_b050_english .exe
BlackBerry Desktop Software v5.0 Service Pack 1 (5.0.1)
http://rapidshare.com/files/331667853/501_b049_english_nomediamanager.exe
orhttp://na.blackberry.com/services/desktop/
6. from where we get BlackBerry Operating System/flashfile ?
Official download site , all in one page , link here
&
Here link file uploaded on Rapidshare
*********************
****
And dont forget to Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader
7. how to check Vendor ID (operator) ?
to check vendor id Press group Key: ALT+Cap+H ->>>Vendor ID
&
for blackberry 9500
From the home screen press and hold escape, then press the left top corner, right top corner, left top corner and right top corner of the screen to bring up a "Help me" page. This shows your PIN, IMEI, free memory, current battery level, firmware version, vendor ID etc
-
Press & Hold ALT Button and then type ESCR in the keypad.Then u will get ur Desired Information.If u confused in this try to search for JL_Cmder program and use that.
-
go to settings/advance option/status
&
for Blackberry 8100 to check vendor id
ALT+RACE/Select Options->Advanced Options-> Applications, ALT+CAPS+H = launches Help Me! Screen with information about your device at one place.
8. how to reset blackberry password ?
Enter wrong password 10 times your device will deletes all your device data & reset user password
Note : If you type your BlackBerry® device password incorrectly , you might be prompted to type blackberry before you can continue.
9. How do I determine if my BlackBerry is "unlocked" ?
Images of Locked Device
Images of Unlocked Device
10. To obtain an unlock code for your BlackBerry
You will need to know your IMEI number for your BB. Look at Options, Status. The IMEI may also be found on the white sticker under the battery (sometimes hard to read--make sure you read it right!). or need to know Vendor ID (operator)
You can purchase the unlock code from various vendors. These listed below are reputable vendors with good feedback from us/user
>>Software or online Server Products Paid
11. How to enter my Unlock Code on BlackBerry ?
Model : BlackBerry 8700
Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.
Model : BlackBerry 8800
You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from UnlockBase.com and press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked
Model : 9500/9530 Series
Ensure the SIM Card that came pre-installed in the 9530 is inserted.
Go to 'Manage Connections'
Click on 'Turn All Connections Off'
Go to 'Options'
Click on 'Status'
Go back to 'Options'
Click on 'Advanced Options'
Click on 'SIM Card'
Type 'MEPD' (letters will not appear on-screen but a menu will pop up)
Type 'MEP2' (user will be prompted to enter MEP code)
Enter the unlock code
Reboot device
Go to 'Manage Connections'
Click on 'Restore Connections'
Device is now unlocked
Please note when entering MEPD, ETC. You need to use caps.
Model : BlackBerry 8220
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (where needed)
7. Type MEPPD or MEPD (you will not be able to see the typed info)
8. Enter MEP2 or MEPP2
9. Now it will say enter network mep code
Model : BlackBerry 8100 Pearl
1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.
Model : BlackBerry 8100 (Vodafone Australia)
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS
This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below
1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
5. The phone will then display a message. The most common is ?nvalid SIM card? (Different message? See FAQ below)
6. Select ?urn Wireless Off?
7. Select ?ettings?Menu , then go to Advanced Options > SIM Card
8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
9. When prompted with ?nter Network MEP code (255 left)?on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.
Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is ?nvalid SIM card? Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display ?nsert SIM??ad Card? ?ard Error?or ?ard Rejected? confirm the SIM card is inserted correctly ?Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.
Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet
Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.
--------------------
Model : All BlackBerry
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked
12. When we get code error specially with 8 digit unlock code ?
Always put sim (any operator sim) inside while entering unlock code, some time code not accept without sim card also.
Download and Extract the file and save it to your personal computer.
Connect the device to the personal computer using Blackberry Desktop Manager.
Double-click the downloaded file SIM_Unlock_Tool_USB_BlackBerry_Gsmfather_server. If prompted, enter your device password. The unlock tool runs, and the device resets when complete.
Proceed with the SIM unlock instructions provided by Server. SIM_Unlock_Tool_USB_BlackBerry_Gsmfather_server.zi p for Blackberry 8xxx and 7xxx series.
SIM_Unlock_Tool_serial_BlackBerry_Gsmfather_server .zip for 6710
http://rapidshare.com/files/331744757/SIM_Unlock_Tool_Serial_BlackBerry_Gsmfather_server.zip
http://rapidshare.com/files/331744758/SIM_Unlock_Tool_USB_BlackBerry_Gsmfather_server.zip
13. Images of Alt/Shift key
14. how many way to unlock BlackBerry phones ?
A. Service Tools free tool (pst carcked for 6/7xxx series blackberry code reader - MFI multiloder for unlock 8/9xxx series)**new security blackberry not supported**
B. no key sim / u sim
C. buy unlock code/unlock by imei
15. which BlackBerry phones supported by Service Tools or free tool (pst carcked for blackberry read code) ?
CodeReader supported BlackBerry 5***, 6***, 7*** series
71xx Series : 7100g,7100g,7100i,7100r,7100t,7100v,7105t,7130e
72xx Series : 7230, 7250, 7280, 7290,
75xx Series : 7520,
77xx Series : 7730, 7750, 7780,
Phones not supported: X700, 7510 (iden), 5810, H700
16. how to read unlock codes with pst carcked ?
Instructions:
1. please disable your antivirus
2. Make sure phone is upgraded to latest 4.x firmware
3. remove/disable password from the phone. If password is
forgotten
4. install BlackBerryLoggerDriverInstaller first before connecting your blackberry
5. then prass get codes , You will see the read codes.....
Quote:
Waiting for Device...
Device Attached.
Device BBPIN :23D87BB1
NET Unlock Code :8701452820647544
Done.
End.
17. how to unlock new blackberry 8/9xxx series with Mfi Multiloder ? HOT !!
Download & Guide MFI Multiloader for blackberry unlock
18. from where i get free tool (pst carcked for blackberry read code) download ?
download link
19. BlackBerryLoggerDriverInstallerDownload link
20. How do I Recover a Dead BlackBerry ?
When your device fails to start, it show one of these symptoms
A. Totally dead
Physical damage, water is the worst enemy of delicate electronic device. Try to hardware.
B. Trying to restart, LED activity only.
Your device is not able to start, something has gone wrong and the OS is corrupt.
C. Failed to start, a white screen with an error message.
Geeks call this an "Uncaught exception error". That is a polite way of saying, the last thread has terminated, the OS has halted because it is corrupt.
In many cases, the Application Loader can be used from Desktop Manager or Windows, If that fails to connect, there is one final solution. A. In order to restore the device, you need to have BlackBerry Desktop Manager installed. The original, as supplied on the BlackBerry CD is adaquite.
Tip: If you choose to download the newest v4xx, you can save a lot of time by choosing custom install and disabling Roxio Media Manager. At start-up, it really slows things down until it has built up it index of media.
B. After it is installed, you need to install a BlackBerry OS file that is specific to your device. The original version, as supplied by the carrier, is the safe choice, but you can use any model specific version. This is not supplied on your BlackBerry CD.
C. Once the OS has been installed, you have to prepare it for the device.
Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader
D. You are now ready to restore your device. Verify that BlackBerry Desktop Manager is NOT running. Plug the device directly into the computer's USB port. Windows XP: Start / Run... / Command Windows Vista: Start / Command (type this into 'start search')
You will see a black window similar to this. I have used UPPERCASE to highlight the typed commands. Windows Vista
Windows XP
When you hit enter at the last command a forced rebuild will start. E. When it has finished, unplug it from the USB port and wait for it to finish start-up. Thirty minutes is typical, do not interrupt it. Once it has recovered, you can use Desktop Manager's Application Loader to customize it and restore from your backup files, if you have saved them previously
21. How To: ReInstall OS When Computer Won't Recognize The Device Is Connected ??
When trying to re-install an operating system that constantly intializes, Desktop Manager will not recognize the device.
solution :
1. Install the desktop software.
2. Install the handheld software. (If it is a non Vendor software.. exp. T-Mobile. search and delete the "vendor.xml" file.)
3. Pull the battery out of your device.
4. With the battery out connect the device to the computer.
5. Go to Options and select "connection settings"
6. Select USB PIN this may take a few moments since there is no battery in the device. you might even have to select detect device in some rare cases.
7. Select the application loader icon.
8. Select all software you want installed.
9. Proceed to the end portion untill you see the "Finish" button.
10. Very IMPORTANT. do not hit the finish button, instead select the ADVANCED button.
11. Make sure both boxes are checked.
12. Proceed until it ask you if you want to automatically back up and restore. Select DO NOT AUTOMATICALLY BACK UP MY HANDHELD.
13. Once the process starts. take care not to bump out the cord and re-insert the battery. Again on some rare occasions you might have to wait until it finishes saying connect to insert the battery.
THIS MAY FAIL THE FIRST OR SECOND TIME DONT WORRY JUST KEEP TRYING.
If you do not get it by the 3rd time.. download the Blackberry java developers kit and install it. once installed find the javaloader.exe file and move it into the c:\ directory
Once it is under the c:\, go to start then run and type. cmd.exe
After the command prompt apears type in "c:\javaloader -usb wipe" to wipe the handheld
*The reason I have highlighted Step 13 is that this is very important to do BEFORE the DM tries to re-start your device because it WILL NOT re-intialize your device IF THE BATTERY IS NOT IN YOUR DEVICE.
22. how to solve if i get this massage (sorry only emergency call are allowed) in call ? you need to remove IT policy
23. how to remove IT policy ?
Go to your Options : Security >> Security Options (the same page where you can enable/disable passwords) & scroll to the bottom. If there's an IT policy attached, it will be mentioned there. Remove the IT policy using these instructions
24. how to get disable password option if the blackberry not thave the disable password option ?
You need to remove IT policy to get disable password option
25. how to solve Authorization Failure??
Here is the solution: Go to Phone Options Select General Options Select Restrict My Identityt - NO Select Show "My Number" - YES You are all set. No more Authorization Failure sending / receiving calls and messages.
26. What is 'data connection refused' ?
If you do not have a BlackBerry Data Plan then you will see this message on the main screen! * If you have a data plan and are seeing this message then you will need to call your service provider and have them check the provisioning on the account. * If you do not have a data plan and want to hide this message from showing up then go to: Options >> Mobile Network and turn Data Services to OFF.
27. What do I need a Data Plan for ?
* Do I need a data plan to get email?
Yes, without a data plan all you have is phone, SMS, and PIM services. (ie... Outlook, Contacts, Calendar ect..)
* Do I need a data plan to access the internet?
Yes you will need a data plan to access the internet
* Do I need a data plan for MMS?
Yes, on most carriers, you will need a data plan to send/retrieve MMS messages.
With NO data plan you may:
# make phone calls
# send/receive text SMS messages
# NOT use any instant messenger program that anyone has found so far
# use the device as a standalone PIM
# NOT send or receive any information over the internet, in any way shape or form, despite what you heard about it being possible
With a generic data plan in addition you may:
# use a third party browser like Opera Mini, but NOT the resident BlackBerry browser
# may get email either via a web interface (using Opera) or other third party app, but NOT BlackBerry push email
# use a number of third party applications that require net access, including some instant messenger programs, as long as they're available to install from DM because:
# canNOT install apps OTA because that requires the resident browser
# canNOT use BlackBerry messenger or do PIN-->PIN messaging
With a BlackBerry data plan you may do all of the above plus:
# receive true BlackBerry push email from up to 10 different email accounts
# use the resident BlackBerry supplied browser to access the internet
# install applications OTA via the supplied resident browser
# use BlackBerry Messenger and send PIN-->PIN messages
28. How do I wipe/reload the BlackBerry using Jl Cmder ?
1. Download and install Jl_Cmder to your PC
2. Make sure ALL your data (i.e. contacts, appointments, memos and etc) are backed up or synced before proceeding! This will wipe everything off of the device
3. Make sure you have the latest version of both Desktop Manager and the Handheld OS installed on your PC.
4. From the PC navigate to c:\program files\common files\research in motion\apploader and delete the file vendor.xml
If you have never installed the Handheld OS before then the vendor.xml file will not be on the PC and you can skip this step
5. Plug the device into the PC using the USB cord and make sure Desktop Manager is closed
6. Remove the battery from the device
Wipe The Device
* Wipe the device using Jl_Cmder
This may take several attempts to connect to the device, so keep trying until it connects and wipes
* The device will reboot to a white screen with a '507' error
If the device will not connect and wipe after several attempts then please follow the instructions
What to do next if Jl_Cmder will not connect and wipe
Install OS and Restore
* Open Desktop Manager and select Application Loader
* Install the OS by following the prompts and selections
* The device will reboot. It can take up to 15 minutes for the 1st boot.
* Restore the previously made backup or re-sync
* Install the battery back into the device and unplug from the PC
Note: If you are connecting via a USB HUB then these instructions may not work. Try connecting via USB on a PC that is not using a HUB
29. What to do next if Jl Cmder will not connect and wipe ?
Disconnect the device from the PC
Download and install Desktop Manager and the Handheld OS to the PC (if they have not already been installed):
Flow these
1. Start a Command Prompt in DOS from the PC (Start >> All Programs >> Accessories >> Command Prompt)
2. Change the directory to: C:\Program Files\Common Files\Research In Motion\AppLoader
If you do not know how to navigate to this directory follow instructions in 2a)
Quote:
2a)
From C:\ prompt type:
cd Program Files
cd Common Files
cd Research In Motion
cd AppLoader
3. Make sure Desktop Manager is not running
4. Connect BlackBerry to the PC
5. Enter the following command in the Command Prompt window:
Quote:
loader.exe /nojvm
Installation
1. The Application Loader Wizard window will open
2. Click on Next
3. You will get a drop down list with the COM ports and one USB port entry
4. Select the one which says USB:UNKNOWN
If you do not see USB:UNKNOWN or USB:BBPIN, then follow instructions listed in a1-a5:
a1) Disconnect the device from the PC.
a2) Keep the Application Loader Wizard window open
a3) Remove the battery and put it back
a4) While the red led is on, reconnect the device to the PC. The led will only stay on for a few seconds
a5) When USB:UNKNOWN appears in the drop down list, you need to immediately select Next
5. The loader should now connect to your device and you will be able to reinstall the OS
30. why we need to delete vendor.xml file ?
To install a OS update from a different carrier you have to delete C:\Program Files\Common Files\Research In Motion\AppLoader\VENDOR.XML first.
For example > If you are laoding a At&t OS on a At&t device, there is no need to delete vendor.xml file. thats all
31. If My blackberry Show no service/no network how to solve ?
a. try turning off the radio/wireless and back on
b. some time its heppen for low battery , make sure the blackberry battery have full charge then try turning off the radio/wireless and back on
c. try update/ReInstall BlackBerry Operating System
after if you Not get network Then
d. To Check Phone At Hardware
&
The other important thing is that the 7280 is primarily a US phone. It is triband, but with 850 as the low band instead of 900 like the 7230. I know most gsm world stuff runs on 900/1800 and the 7280 will pick up 1800, but many countries have a weak 1800 signal and a very strong 900 signal.
32. If My blackberry Show cal mode how to get normal mode ?
type on blackberry keybord START
For blackberry 8100
when you want type S hold A button like this
hope clear this...
33. with MFI multiloder unlock after i got error during flash my blackberry Unable to reconnect to the device during a multi-stage load operation ?
If you got error during flash your blackberry Unable to reconnect to the device during a multi-stage load operation you should be type START to out cal mode then you will see error 507 , after you need to update os again the blackberry to done your job.
34. how can be solve if i got this massage > no software update is required for your device , during flash my blackberry ?
1. Make sure you have instle on your pc the blackberry flashfile which blackberry model you need to work , if that flash file downgrade or upgrade no matter , should be correct blackberry model flashfile
2. Instle Latest Blackberry Desktopmanager version 4.7.0.32 34 part2 WITHOUT select Automatic Update service
3. go to C:\Program Files\Common Files\Research In Motion\Shared\Loader Files remove/delete other bb model os from there if you already instled , make sure only there have the blackberry os file which model you want to do update 
4. Be sure the blackberry not live in cal mode , if the blackberry on cal mode you should be type start to out cal mode
Remove battery from blackberry & connect without battery to pc then
Windows XP: Start / Run... type > cmd 
You will see a black window similar to this. I have used UPPERCASE to highlight the typed commands.
Quote:
CD \
CD PROGRA~1
CD COMMON~1
CD RESEAR~1
CD APPLOA~1
LOADER /NOJVM
copy and past this QUOTE to command prompt exe
After When you hit enter at the last command a forced will start application loder then update os your blackberry , 
when application loder come this massage like on pic > wait for device initialize , then insert battery on blackberry , dont touch/disconnect cable
34part2 Why won't my OS update? I deleted the vendor.xml file!
So, you downloaded the newest, latest and greatest OS for your BlackBerry and have followed the below instructions:
1. Download and install Desktop Manager.
2. Download and install the OS of your choice for your device.
3. Delete vendor.xml located in c:\program files\common files\research in motion\apploader.
4. Plug in BB and open Desktop Manager.
However, when you open Desktop Manager you get no prompt to update. When you open Application Loader your new OS is not listed!! And this has been plaguing people for months now!!!
The problem lies in the new Desktop Manager's automatic "Check for Updates" feature. This feature uses your internet connection to look for OS updates for your device from your carrier. When it does this it loads a second virtual vendor.xml file in the temp folder on your computer. So, even after you delete the normal one that is installed with the OS and Desktop Manager, the automatic "Check for Updates" feature loads another one based on the brand of device you've got plugged into the PC.
To prevent this from happening you need to install Desktop Manager WITHOUT this Automatic Update service. Below are the steps to remove this service.
1. Go to Control Panel >Add/Remove Programs.
2. Click on "BlackBerry Desktop Software" and select "Change/Remove."
3. When prompted, hit "Next" and then you should get options for Modify, Repair, or Remove. Choose "Modify."
4. In the list of installed items, you should see "BlackBerry Automatic Update." Click the icon next to it and change it to "This feature will not be available." That should put an "X" next to "BlackBerry Automatic Update." If you don't see this option in this list then continue with the install and the installation will ask you a few screens later.
A screen will be shown where you will be asked to check the boxes for:
A) "Start BlackBerry Desktop Manager automatically each time the computer starts."
B) "Create a shortcut for BlackBerry Desktop Manager on the Windows Desktop."
C) "Check for software updates."
Be sure number 3, "Check for software updates," is NOT checked.
Note: If you're installing Desktop Manager fresh, be sure and choose the "Custom"
install button so that you get the prompt for what features you want installed. Otherwise all the features will be installed as normal and you'll have this issue.)
Once that is complete, you'll need to go back and search your computer for vendor.xml. When you do the search, make sure you click on "Advanced Options" and make sure that you search Hidden files and folders. This is important as some operating systems create a virtual store in the temp folder that this vendor.xml file is located in. You will not find this particular vendor.xml if you don't have hidden files/folders selected for search. Once the hidden vendor.xml is deleted it won't come back if you've reinstalled Desktop Manager without the Automatic Update Feature enabled.
Now, make sure your OS is installed (you may need to install the OS again, if you actually remove Desktop Manager and then reinstall Desktop Manager again. Make sure that you delete the normal vendor.xml file LAST before updating the device.
Tip of the day: Desktop Manager is not even required for doing an OS upgrade. In the same folder as the vendor.xml file is a file called Loader.exe. Running that will run apploader without Desktop Manager. It still makes the full backup and restore, but without all the DM stuff running in the background.
info by John Clark
35. If Error 507 show on blackberry screen how can solve ?
To solve Error 507 You need update/ReInstall the BlackBerry Operating System , link here tested by forum user
just type any password what you like 123456789
36. from where i can get userguide for my blackberry device ?
Instle the blackberry os, after you will be found there > C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\xxxx-v4.xxx\userguide_bb8100
37. blackberry 7290/7230 cant dial number what is solution ?
Just reload another version os
38. why my blackberry show battery cross sign ?
battery cross sign its battery problem not software , i mean you have use wrong types of battery
39.WHAT IS BLACKBERRY NEW SECURITY?
NEW SECURITY type platform ('09) - that cannot be unlocked by the normal Blackberry unlock code services.
there are 2 types of batteries for blackberry phones . c-s2 and c-s1 ,
40.How do I find out if my phone has the NEW SECURITY?
I had a 8520 as OLD Security
BB 8520 - 355931-03-1241158 - 06814004 <- OLD SECURITY BB 9500 - 359484-02-9191676 - 07484007 <- NEW SECURITY 41. Debranding blackberry info & download vsm file for debrand blackberryPROCEDURE
WHAT YOU NEED -
1. BB Desktop Manager installed.
2. Your Phones Latest OS downloaded and installed and Vendor.xml deleted
3. MFI Multiloader 2.0.1.3 installed.
4. The VSM File 
STEPS I FOLLOWED.
1. Open MML and connect your phone and let MML continue its procedure till your see "1" on your phones screen.
2. Now disconnect your Phone and type "START" on your phone - You should now see " No Application Linked(Factory OS) " on your phones screen. You would normally just install/restore your OS using Blackberry DM now and your phone would be SIM unlocked.
But we now need to change the VSM file, in order to change the Vendor ID, before we install the OS.
3. Keep the Internet disconnected and open MML and untick "AUTO START"
4. Now on your computer keyboard press CTRL+ALT+SHIFT+F12 to get the secret hidden menu in MML
5. NOW connect your phone.
6. Click on LOAD VSM and Choose the VSM file that your have downloaded earlier - Press "OK" Once the VSM File successfully installed.
7. Now Open Blackberry Desktop Manager and Install / Restore the Latest OS you want.
When you start up your phone, you will have DE-BRANDED and a new Vendor ID.
DOWNLOAD LINK
To check the firmware version of your Blackberry simply navigate it? menu:-
Goto SETTINGS or OPTIONS then ABOUT
Images of firmware version
2. How To find imei ?
To find imei is going to Options->Status there you will find imei number of phone
3. How To Connect blackberry With Pc.?
connect your blackberry to pc with data cable (same motorola v3 usb cable)
4. how To update/ReInstall BlackBerry Operating System ?
Connect your device to your computer.
Open the BlackBerry® Desktop Manager.
Click Application Loader.
Click Start in Add/Remove Applications or Update Applications.
If necessary, perform the following actions:
If the Device Security Password dialog box appears, type your device password. Click Next.
If the Communication Port Selection dialog box appears, specify a communications port. Click Next.
Click Next.
Perform any of the following actions:
To add an application that appears in the list, select the check box beside the application.
To add an application that does not appear in the list, click Browse. Double-click an application loader (.alx or .ali) file.
Click Next.
Click Finish.
#Without desktop manager read this
1: Download & instle the blackberry flashfile (no need instle blackberry desktop manager)
2: Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader
3: With battery Connect your BlackBerry device to your computer
4: Run Loader from c:\program files\common files\research in motion\apploader & click Next
5: Select all software you want installed.
6: Proceed to the end portion untill you see the "Finish" button
7: Very IMPORTANT. do not hit the finish button, instead select the ADVANCED button.
8: Make sure both boxes are checked.
9: Proceed until it ask you if you want to automatically back up and restore, Select DO NOT AUTOMATICALLY BACK UP MY HANDHELD do next
10: & wait for Your device's software has been updated successfully
5. from where we get BlackBerry desktop software ?
BlackBerry Desktop Software v4.7
http://rapidshare.com/files/331643973/470_b050_english .exe
BlackBerry Desktop Software v5.0 Service Pack 1 (5.0.1)
http://rapidshare.com/files/331667853/501_b049_english_nomediamanager.exe
orhttp://na.blackberry.com/services/desktop/
6. from where we get BlackBerry Operating System/flashfile ?
Official download site , all in one page , link here
&
Here link file uploaded on Rapidshare
*********************
****
And dont forget to Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader
7. how to check Vendor ID (operator) ?
to check vendor id Press group Key: ALT+Cap+H ->>>Vendor ID
&
for blackberry 9500
From the home screen press and hold escape, then press the left top corner, right top corner, left top corner and right top corner of the screen to bring up a "Help me" page. This shows your PIN, IMEI, free memory, current battery level, firmware version, vendor ID etc
-
Press & Hold ALT Button and then type ESCR in the keypad.Then u will get ur Desired Information.If u confused in this try to search for JL_Cmder program and use that.
-
go to settings/advance option/status
&
for Blackberry 8100 to check vendor id
ALT+RACE/Select Options->Advanced Options-> Applications, ALT+CAPS+H = launches Help Me! Screen with information about your device at one place.
Quote:
| 100 T-Mobile US 101 AWS 102 Cingular Wireless 103 Nextel 104 Sprint PCS 105 Verizon 106 Alltel 107 Rogers 109 BWA (Aliant/Sasktel) 111 MM02 DE 113 Telfort 114 T-Mobile DE/AU 115 TIM 116 Hutchison 117 Bouygues 118 SFR 119 Orange_France 120 VODAFONE (UK) 121 Telcel 122 Telstra 123 T-Mobile (UK) 124 Vodafone Germany 125 MM02 UK/IRL/NL 126 Telus 127 SMART 128 Starhub 129 Telefonica 130 Swisscom 131 Cable & Wireless 132 Vodafone (IT) 133 Vodafone (ES) 134 T-Mobile (NL) 135 Cincinnati Bell 136 Telefonica_LAM 137 Vodafone Austria 138 Vodafone Australia 139 Vodafone Ireland 140 Vodafone Sweden 141 CSL 142 Orange UK 143 Vodafone New Zealand 144 SingTel 145 Globe 146 Optus 147 Orange Mobistar 148 Vodafone_HU 149 Bharti 150 KPN 151 TIM_Greece 152 Proximus 153 Vodafone_Portugal 154 TIM_Brazil 155 BT_Mobile 156 Earthlink 158 E-Plus 159 BASE 160 Dobson 161 Vodafone_Egypt 162 Orange_Switzerland 164 Triton 165 Maxis 166 Vodafone_Denmark_(TDC) 167 MobileOne_(Voda_Singapore) 168 Vodacom 169 T-Mobile_PO 170 T-Mobile_CZ 171 T-Mobile_HU 173 MTN 174 Entel 175 Amena 176 SmarTone 177 TCS 178 Avea 179 F100 180 Turkcell 181 Partner 183 Orange_Global 186 Telkomsel 188 Vodafone_Greece 189 USCC 190 Mobilink 194 Voda_Luxembourg 195 Voda_Iceland 198 Vodafone_CZ 204 China_Mobile 205 Movilnet 209 Sympac 210 TIM_Argentina 212 Etisalat 214 AMX 215 Telefonica_Venezuela 217 Orange Romania 218 KTP 222 Mobitel Bulgaria 224 PCCW/Sunday 227 Mobily 229 Eurotel 230 Hutchison Essar |
8. how to reset blackberry password ?
Enter wrong password 10 times your device will deletes all your device data & reset user password
Note : If you type your BlackBerry® device password incorrectly , you might be prompted to type blackberry before you can continue.
9. How do I determine if my BlackBerry is "unlocked" ?
Quote:
| To determine if your BlackBerry is "unlocked" for use on carriers other than for which it is branded: A. On your BlackBerry, go to Options > Advanced Options > Sim Card. B. At that screen type MEPD (see note below) on your keyboard. A new menu will pop up. If your BlackBerry has a SureType keyboard (71xx and 81xx devices) you will need to double-tap the P, so the actual keys entered become M E P P D. C. Look for Network in the list. D. If your device is "unlocked", it should say Disabled or Inactive. If it says Active, it's still locked to that carrier |
Images of Unlocked Device
10. To obtain an unlock code for your BlackBerry
You will need to know your IMEI number for your BB. Look at Options, Status. The IMEI may also be found on the white sticker under the battery (sometimes hard to read--make sure you read it right!). or need to know Vendor ID (operator)
You can purchase the unlock code from various vendors. These listed below are reputable vendors with good feedback from us/user
>>Software or online Server Products Paid
11. How to enter my Unlock Code on BlackBerry ?
Model : BlackBerry 8700
Go to the Menu -> Options -> Advanced Options -> Sim card press select, while holding the Shift key (bottom right corner CAPS), type mepd. You should now see the five locking categories listed, while holding the alt key, type mep2. Release the alt key. You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.
Model : BlackBerry 8800
You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from UnlockBase.com and press in the track wheel / jog dial to confirm
6 - Your phone is now unlocked
Model : 9500/9530 Series
Ensure the SIM Card that came pre-installed in the 9530 is inserted.
Go to 'Manage Connections'
Click on 'Turn All Connections Off'
Go to 'Options'
Click on 'Status'
Go back to 'Options'
Click on 'Advanced Options'
Click on 'SIM Card'
Type 'MEPD' (letters will not appear on-screen but a menu will pop up)
Type 'MEP2' (user will be prompted to enter MEP code)
Enter the unlock code
Reboot device
Go to 'Manage Connections'
Click on 'Restore Connections'
Device is now unlocked
Please note when entering MEPD, ETC. You need to use caps.
Model : BlackBerry 8220
1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (where needed)
7. Type MEPPD or MEPD (you will not be able to see the typed info)
8. Enter MEP2 or MEPP2
9. Now it will say enter network mep code
Model : BlackBerry 8100 Pearl
1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.
Model : BlackBerry 8100 (Vodafone Australia)
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS
This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below
1. Take note of the unlocking code shown above
2. Insert a Non-Vodafone Australia working SIM card.
3. Ensure the phone is charged and then switch the phone on.
4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
5. The phone will then display a message. The most common is ?nvalid SIM card? (Different message? See FAQ below)
6. Select ?urn Wireless Off?
7. Select ?ettings?Menu , then go to Advanced Options > SIM Card
8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
9. When prompted with ?nter Network MEP code (255 left)?on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)
10. Reset the phone by pulling the battery
11. Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.
Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is ?nvalid SIM card? Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display ?nsert SIM??ad Card? ?ard Error?or ?ard Rejected? confirm the SIM card is inserted correctly ?Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.
Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet
Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.
--------------------
Model : All BlackBerry
1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked
12. When we get code error specially with 8 digit unlock code ?
You got message "code error" when try to unlock a blackberry, Dont worry here is the solution.
When you get code error specially with 8 digit unlock code, follow the instructions below to fix this and able to unlock blackberry phones successfully.
Always put sim (any operator sim) inside while entering unlock code, some time code not accept without sim card also.
Download and Extract the file and save it to your personal computer.
Connect the device to the personal computer using Blackberry Desktop Manager.
Double-click the downloaded file SIM_Unlock_Tool_USB_BlackBerry_Gsmfather_server. If prompted, enter your device password. The unlock tool runs, and the device resets when complete.
Proceed with the SIM unlock instructions provided by Server. SIM_Unlock_Tool_USB_BlackBerry_Gsmfather_server.zi p for Blackberry 8xxx and 7xxx series.
SIM_Unlock_Tool_serial_BlackBerry_Gsmfather_server .zip for 6710
http://rapidshare.com/files/331744757/SIM_Unlock_Tool_Serial_BlackBerry_Gsmfather_server.zip
http://rapidshare.com/files/331744758/SIM_Unlock_Tool_USB_BlackBerry_Gsmfather_server.zip
13. Images of Alt/Shift key
14. how many way to unlock BlackBerry phones ?
A. Service Tools free tool (pst carcked for 6/7xxx series blackberry code reader - MFI multiloder for unlock 8/9xxx series)**new security blackberry not supported**
B. no key sim / u sim
C. buy unlock code/unlock by imei
15. which BlackBerry phones supported by Service Tools or free tool (pst carcked for blackberry read code) ?
CodeReader supported BlackBerry 5***, 6***, 7*** series
71xx Series : 7100g,7100g,7100i,7100r,7100t,7100v,7105t,7130e
72xx Series : 7230, 7250, 7280, 7290,
75xx Series : 7520,
77xx Series : 7730, 7750, 7780,
Phones not supported: X700, 7510 (iden), 5810, H700
16. how to read unlock codes with pst carcked ?
Instructions:
1. please disable your antivirus
2. Make sure phone is upgraded to latest 4.x firmware
3. remove/disable password from the phone. If password is
forgotten
4. install BlackBerryLoggerDriverInstaller first before connecting your blackberry
5. then prass get codes , You will see the read codes.....
Quote:
Waiting for Device...
Device Attached.
Device BBPIN :23D87BB1
NET Unlock Code :8701452820647544
Done.
End.
17. how to unlock new blackberry 8/9xxx series with Mfi Multiloder ? HOT !!
Download & Guide MFI Multiloader for blackberry unlock
18. from where i get free tool (pst carcked for blackberry read code) download ?
download link
19. BlackBerryLoggerDriverInstallerDownload link
20. How do I Recover a Dead BlackBerry ?
When your device fails to start, it show one of these symptoms
A. Totally dead
Physical damage, water is the worst enemy of delicate electronic device. Try to hardware.
B. Trying to restart, LED activity only.
Your device is not able to start, something has gone wrong and the OS is corrupt.
C. Failed to start, a white screen with an error message.
Geeks call this an "Uncaught exception error". That is a polite way of saying, the last thread has terminated, the OS has halted because it is corrupt.
In many cases, the Application Loader can be used from Desktop Manager or Windows, If that fails to connect, there is one final solution. A. In order to restore the device, you need to have BlackBerry Desktop Manager installed. The original, as supplied on the BlackBerry CD is adaquite.
Tip: If you choose to download the newest v4xx, you can save a lot of time by choosing custom install and disabling Roxio Media Manager. At start-up, it really slows things down until it has built up it index of media.
B. After it is installed, you need to install a BlackBerry OS file that is specific to your device. The original version, as supplied by the carrier, is the safe choice, but you can use any model specific version. This is not supplied on your BlackBerry CD.
C. Once the OS has been installed, you have to prepare it for the device.
Delete the vendor.xml file located in c:\program files\common files\research in motion\apploader
D. You are now ready to restore your device. Verify that BlackBerry Desktop Manager is NOT running. Plug the device directly into the computer's USB port. Windows XP: Start / Run... / Command Windows Vista: Start / Command (type this into 'start search')
You will see a black window similar to this. I have used UPPERCASE to highlight the typed commands. Windows Vista Quote:
| CD \ CD PROGRAM FILES CD COMMON FILES CD RESEARCH IN MOTION CD APPLOADER LOADER /NOJVM |
Quote:
| CD \ CD PROGRA~1 CD COMMON~1 CD RESEAR~1 CD APPLOA~1 LOADER /NOJVM |
21. How To: ReInstall OS When Computer Won't Recognize The Device Is Connected ??
When trying to re-install an operating system that constantly intializes, Desktop Manager will not recognize the device.
solution :
1. Install the desktop software.
2. Install the handheld software. (If it is a non Vendor software.. exp. T-Mobile. search and delete the "vendor.xml" file.)
3. Pull the battery out of your device.
4. With the battery out connect the device to the computer.
5. Go to Options and select "connection settings"
6. Select USB PIN this may take a few moments since there is no battery in the device. you might even have to select detect device in some rare cases.
7. Select the application loader icon.
8. Select all software you want installed.
9. Proceed to the end portion untill you see the "Finish" button.
10. Very IMPORTANT. do not hit the finish button, instead select the ADVANCED button.
11. Make sure both boxes are checked.
12. Proceed until it ask you if you want to automatically back up and restore. Select DO NOT AUTOMATICALLY BACK UP MY HANDHELD.
13. Once the process starts. take care not to bump out the cord and re-insert the battery. Again on some rare occasions you might have to wait until it finishes saying connect to insert the battery.
THIS MAY FAIL THE FIRST OR SECOND TIME DONT WORRY JUST KEEP TRYING.
If you do not get it by the 3rd time.. download the Blackberry java developers kit and install it. once installed find the javaloader.exe file and move it into the c:\ directory
Once it is under the c:\, go to start then run and type. cmd.exe
After the command prompt apears type in "c:\javaloader -usb wipe" to wipe the handheld
*The reason I have highlighted Step 13 is that this is very important to do BEFORE the DM tries to re-start your device because it WILL NOT re-intialize your device IF THE BATTERY IS NOT IN YOUR DEVICE.
22. how to solve if i get this massage (sorry only emergency call are allowed) in call ? you need to remove IT policy
23. how to remove IT policy ?
Go to your Options : Security >> Security Options (the same page where you can enable/disable passwords) & scroll to the bottom. If there's an IT policy attached, it will be mentioned there. Remove the IT policy using these instructions
24. how to get disable password option if the blackberry not thave the disable password option ?
You need to remove IT policy to get disable password option
25. how to solve Authorization Failure??
Here is the solution: Go to Phone Options Select General Options Select Restrict My Identityt - NO Select Show "My Number" - YES You are all set. No more Authorization Failure sending / receiving calls and messages.
26. What is 'data connection refused' ?
If you do not have a BlackBerry Data Plan then you will see this message on the main screen! * If you have a data plan and are seeing this message then you will need to call your service provider and have them check the provisioning on the account. * If you do not have a data plan and want to hide this message from showing up then go to: Options >> Mobile Network and turn Data Services to OFF.
27. What do I need a Data Plan for ?
* Do I need a data plan to get email?
Yes, without a data plan all you have is phone, SMS, and PIM services. (ie... Outlook, Contacts, Calendar ect..)
* Do I need a data plan to access the internet?
Yes you will need a data plan to access the internet
* Do I need a data plan for MMS?
Yes, on most carriers, you will need a data plan to send/retrieve MMS messages.
With NO data plan you may:
# make phone calls
# send/receive text SMS messages
# NOT use any instant messenger program that anyone has found so far
# use the device as a standalone PIM
# NOT send or receive any information over the internet, in any way shape or form, despite what you heard about it being possible
With a generic data plan in addition you may:
# use a third party browser like Opera Mini, but NOT the resident BlackBerry browser
# may get email either via a web interface (using Opera) or other third party app, but NOT BlackBerry push email
# use a number of third party applications that require net access, including some instant messenger programs, as long as they're available to install from DM because:
# canNOT install apps OTA because that requires the resident browser
# canNOT use BlackBerry messenger or do PIN-->PIN messaging
With a BlackBerry data plan you may do all of the above plus:
# receive true BlackBerry push email from up to 10 different email accounts
# use the resident BlackBerry supplied browser to access the internet
# install applications OTA via the supplied resident browser
# use BlackBerry Messenger and send PIN-->PIN messages
28. How do I wipe/reload the BlackBerry using Jl Cmder ?
1. Download and install Jl_Cmder to your PC
2. Make sure ALL your data (i.e. contacts, appointments, memos and etc) are backed up or synced before proceeding! This will wipe everything off of the device
3. Make sure you have the latest version of both Desktop Manager and the Handheld OS installed on your PC.
4. From the PC navigate to c:\program files\common files\research in motion\apploader and delete the file vendor.xml
If you have never installed the Handheld OS before then the vendor.xml file will not be on the PC and you can skip this step
5. Plug the device into the PC using the USB cord and make sure Desktop Manager is closed
6. Remove the battery from the device
Wipe The Device
* Wipe the device using Jl_Cmder
This may take several attempts to connect to the device, so keep trying until it connects and wipes
* The device will reboot to a white screen with a '507' error
If the device will not connect and wipe after several attempts then please follow the instructions
What to do next if Jl_Cmder will not connect and wipe
Install OS and Restore
* Open Desktop Manager and select Application Loader
* Install the OS by following the prompts and selections
* The device will reboot. It can take up to 15 minutes for the 1st boot.
* Restore the previously made backup or re-sync
* Install the battery back into the device and unplug from the PC
Note: If you are connecting via a USB HUB then these instructions may not work. Try connecting via USB on a PC that is not using a HUB29. What to do next if Jl Cmder will not connect and wipe ?
Disconnect the device from the PC
Download and install Desktop Manager and the Handheld OS to the PC (if they have not already been installed):
Flow these
1. Start a Command Prompt in DOS from the PC (Start >> All Programs >> Accessories >> Command Prompt)
2. Change the directory to: C:\Program Files\Common Files\Research In Motion\AppLoader
If you do not know how to navigate to this directory follow instructions in 2a)
Quote:
2a)
From C:\ prompt type:
cd Program Files
cd Common Files
cd Research In Motion
cd AppLoader
3. Make sure Desktop Manager is not running
4. Connect BlackBerry to the PC
5. Enter the following command in the Command Prompt window:
Quote:
loader.exe /nojvm
Installation
1. The Application Loader Wizard window will open
2. Click on Next
3. You will get a drop down list with the COM ports and one USB port entry
4. Select the one which says USB:UNKNOWN
If you do not see USB:UNKNOWN or USB:BBPIN, then follow instructions listed in a1-a5:
a1) Disconnect the device from the PC.
a2) Keep the Application Loader Wizard window open
a3) Remove the battery and put it back
a4) While the red led is on, reconnect the device to the PC. The led will only stay on for a few seconds
a5) When USB:UNKNOWN appears in the drop down list, you need to immediately select Next
5. The loader should now connect to your device and you will be able to reinstall the OS
30. why we need to delete vendor.xml file ?
To install a OS update from a different carrier you have to delete C:\Program Files\Common Files\Research In Motion\AppLoader\VENDOR.XML first.
For example > If you are laoding a At&t OS on a At&t device, there is no need to delete vendor.xml file. thats all
31. If My blackberry Show no service/no network how to solve ?
a. try turning off the radio/wireless and back on
b. some time its heppen for low battery , make sure the blackberry battery have full charge then try turning off the radio/wireless and back on
c. try update/ReInstall BlackBerry Operating System
after if you Not get network Then
d. To Check Phone At Hardware
&
The other important thing is that the 7280 is primarily a US phone. It is triband, but with 850 as the low band instead of 900 like the 7230. I know most gsm world stuff runs on 900/1800 and the 7280 will pick up 1800, but many countries have a weak 1800 signal and a very strong 900 signal.
32. If My blackberry Show cal mode how to get normal mode ?
type on blackberry keybord START
For blackberry 8100
when you want type S hold A button like this
hope clear this...
33. with MFI multiloder unlock after i got error during flash my blackberry Unable to reconnect to the device during a multi-stage load operation ?
If you got error during flash your blackberry Unable to reconnect to the device during a multi-stage load operation you should be type START to out cal mode then you will see error 507 , after you need to update os again the blackberry to done your job.
34. how can be solve if i got this massage > no software update is required for your device , during flash my blackberry ?
2. Instle Latest Blackberry Desktopmanager version 4.7.0.32 34 part2 WITHOUT select Automatic Update service
3. go to C:\Program Files\Common Files\Research In Motion\Shared\Loader Files remove/delete other bb model os from there if you already instled , make sure only there have the blackberry os file which model you want to do update
Remove battery from blackberry & connect without battery to pc then
Windows XP: Start / Run... type > cmd
Quote:
CD \
CD PROGRA~1
CD COMMON~1
CD RESEAR~1
CD APPLOA~1
LOADER /NOJVM
copy and past this QUOTE to command prompt exe
After When you hit enter at the last command a forced will start application loder then update os your blackberry ,
34part2 Why won't my OS update? I deleted the vendor.xml file!
So, you downloaded the newest, latest and greatest OS for your BlackBerry and have followed the below instructions:
1. Download and install Desktop Manager.
2. Download and install the OS of your choice for your device.
3. Delete vendor.xml located in c:\program files\common files\research in motion\apploader.
4. Plug in BB and open Desktop Manager.
However, when you open Desktop Manager you get no prompt to update. When you open Application Loader your new OS is not listed!! And this has been plaguing people for months now!!!
The problem lies in the new Desktop Manager's automatic "Check for Updates" feature. This feature uses your internet connection to look for OS updates for your device from your carrier. When it does this it loads a second virtual vendor.xml file in the temp folder on your computer. So, even after you delete the normal one that is installed with the OS and Desktop Manager, the automatic "Check for Updates" feature loads another one based on the brand of device you've got plugged into the PC.
To prevent this from happening you need to install Desktop Manager WITHOUT this Automatic Update service. Below are the steps to remove this service.
1. Go to Control Panel >Add/Remove Programs.
2. Click on "BlackBerry Desktop Software" and select "Change/Remove."
3. When prompted, hit "Next" and then you should get options for Modify, Repair, or Remove. Choose "Modify."
4. In the list of installed items, you should see "BlackBerry Automatic Update." Click the icon next to it and change it to "This feature will not be available." That should put an "X" next to "BlackBerry Automatic Update." If you don't see this option in this list then continue with the install and the installation will ask you a few screens later.
A screen will be shown where you will be asked to check the boxes for:
A) "Start BlackBerry Desktop Manager automatically each time the computer starts."
B) "Create a shortcut for BlackBerry Desktop Manager on the Windows Desktop."
C) "Check for software updates."
Be sure number 3, "Check for software updates," is NOT checked.
Note: If you're installing Desktop Manager fresh, be sure and choose the "Custom"
install button so that you get the prompt for what features you want installed. Otherwise all the features will be installed as normal and you'll have this issue.)
Once that is complete, you'll need to go back and search your computer for vendor.xml. When you do the search, make sure you click on "Advanced Options" and make sure that you search Hidden files and folders. This is important as some operating systems create a virtual store in the temp folder that this vendor.xml file is located in. You will not find this particular vendor.xml if you don't have hidden files/folders selected for search. Once the hidden vendor.xml is deleted it won't come back if you've reinstalled Desktop Manager without the Automatic Update Feature enabled.
Now, make sure your OS is installed (you may need to install the OS again, if you actually remove Desktop Manager and then reinstall Desktop Manager again. Make sure that you delete the normal vendor.xml file LAST before updating the device.
Tip of the day: Desktop Manager is not even required for doing an OS upgrade. In the same folder as the vendor.xml file is a file called Loader.exe. Running that will run apploader without Desktop Manager. It still makes the full backup and restore, but without all the DM stuff running in the background.
info by John Clark
To solve Error 507 You need update/ReInstall the BlackBerry Operating System , link here tested by forum user
just type any password what you like 123456789
36. from where i can get userguide for my blackberry device ?
Instle the blackberry os, after you will be found there > C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\xxxx-v4.xxx\userguide_bb8100
37. blackberry 7290/7230 cant dial number what is solution ?
Just reload another version os
38. why my blackberry show battery cross sign ?
battery cross sign its battery problem not software , i mean you have use wrong types of battery
39.WHAT IS BLACKBERRY NEW SECURITY?
NEW SECURITY type platform ('09) - that cannot be unlocked by the normal Blackberry unlock code services.
there are 2 types of batteries for blackberry phones . c-s2 and c-s1 ,
40.How do I find out if my phone has the NEW SECURITY?
I had a 8520 as OLD Security
BB 8520 - 355931-03-1241158 - 06814004 <- OLD SECURITY BB 9500 - 359484-02-9191676 - 07484007 <- NEW SECURITY 41. Debranding blackberry info & download vsm file for debrand blackberryPROCEDURE
WHAT YOU NEED -
1. BB Desktop Manager installed.
2. Your Phones Latest OS downloaded and installed and Vendor.xml deleted
3. MFI Multiloader 2.0.1.3 installed.
4. The VSM File
1. Open MML and connect your phone and let MML continue its procedure till your see "1" on your phones screen.
2. Now disconnect your Phone and type "START" on your phone - You should now see " No Application Linked(Factory OS) " on your phones screen. You would normally just install/restore your OS using Blackberry DM now and your phone would be SIM unlocked.
But we now need to change the VSM file, in order to change the Vendor ID, before we install the OS.
3. Keep the Internet disconnected and open MML and untick "AUTO START"
4. Now on your computer keyboard press CTRL+ALT+SHIFT+F12 to get the secret hidden menu in MML
5. NOW connect your phone.
6. Click on LOAD VSM and Choose the VSM file that your have downloaded earlier - Press "OK" Once the VSM File successfully installed.
7. Now Open Blackberry Desktop Manager and Install / Restore the Latest OS you want.
When you start up your phone, you will have DE-BRANDED and a new Vendor ID.
Related Articles :
No comments:
Post a Comment